You’ve programmed three sets of 8–10 on the barbell curl. Your client hits 10 on every set at 20 kg. The next weight available is 22.5 kg. Do you put it on?
Work out the jump first. From 20 kg, an extra 2.5 kg is a 12.5% increase. Put a 0.25 kg plate on each side and 20 kg becomes 20.5 kg. That’s a 2.5% increase.
Same exercise. Same starting load. Two very different progressions.
Calculate the jump from the weight the client is lifting
Divide the increase by the current working load and multiply by 100. Use the total load for a barbell, including the bar. For fixed dumbbells, compare the weight of one dumbbell with the weight of the next one.
| Current load | Next load | Increase |
|---|---|---|
| 20 kg barbell curl | 22.5 kg | 12.5% |
| 20 kg barbell curl | 20.5 kg | 2.5% |
| 100 kg barbell squat | 102.5 kg | 2.5% |
The same 2.5 kg jump is five times as large, in percentage terms, on the curl as it is on the squat. Use the percentage to see how big a change you’re asking for. The rep target, effort and execution tell you whether the client can use it.
What that looks like in a program
Say the curl is written for 3 × 8–10 at 3010, with 90 seconds’ rest. Set the standard up front. Use the same range on each rep, take three seconds to lower the bar and keep the torso still.
| Exposure | Load | Reps by set | Next decision |
|---|---|---|---|
| 1 | 20 kg | 10, 9, 8 | Keep 20 kg and build reps. |
| 2 | 20 kg | 10, 10, 10 | Trial 20.5 kg if the reps met the standard and the intended effort. |
| 3 | 20.5 kg | 9, 8, 8 | Keep 20.5 kg and build reps again. |
Those numbers are an example. If the client needs to swing the bar or shorten the range to reach eight at the new weight, return to the last load they could use to meet the prescription. Write down the actual load and reps so the next session starts with a clear decision.
What if the gym has no microplates?
Keep the current load and build reps within the prescribed range. If the client is already at the top, repeat the load until they can finish the sets with more in reserve at the same tempo and range. Then trial the heavier weight at the bottom of the range. If the available jumps repeatedly dictate the session, use an exercise or piece of equipment that lets you make smaller increments while still serving the same training goal.
There’s research behind progressing reps as well as load. In an eight-week lower-body study of resistance-trained adults, Plotkin and colleagues compared increasing reps at a fixed load with increasing load within a prescribed rep range. Most outcomes were similar between the two groups. That gives you a reason to use rep progression when it fits the exercise. The curl example above is a programming application. Read the original study.
Before you write “add 2.5 kg next week,” check how much that changes the load and what the client needs to show before they earn the increase. Put both decisions in the program.
If you want help setting loading and progression rules for the clients you coach, book a Program Design Mentorship enquiry call.




